AutofunkantennenMH 4-Z

¼ λ Gummi-Autofunkantenne für das 160 MHz Band

Beschreibung

  • Hochflexibler Gummistrahler mit integriertem, strahlenden Stahldrahtelement.
  • Ideal, wenn der Strahler mechanischen Belastungen (z.B. beim Fahren unter tief hängenden Objekten) ausgesetzt ist.
  • Edelstahl-Antennenfuß (Z-Fuß) mit Kugelgelenk und Flügelschraube.
  • Einfache Montage von außen.
    Modelle mit Dachstärke von 2 bis 7.5 mm Montage von Innen.
  • Wahlweise zwei Anschlussmöglichkeiten:
    • Z-Fuß : FME-Anschluss (ohne Kabel).
    • ZP4-Fuß : mit festmontiertem 4 m Kabel und FME-Buchse.
     

Spezifikationen

Elektrisch DE
Modell MH 4-Z
Frequenz Abstimmbar durch Kürzen innerhalb : 144...175 MHz
(auch verwendbar : 175 - 225 MHz)
Antennentyp ¼ λ Autofunkantenne
Max. Eingangsleistung 150 W
Polarisation Vertikal
Impedanz 50 Ω
VSWR ≤ 1.3 bei Resonanzfrequenz
Bandbreite ≥ 15 MHz @ VSWR ≤ 2.0
Gewinn (EIA RS-329-1) 0 dB
Mechanisch DE
Materialien Strahler :
Gummiummantelter
Stahldraht Messing verchromt
Fuß :
Messing, verchromt
witterungsbeständiger Kunststoff Edelstahl
Installationsmoment 7.5 ±1 Nm
Farbe Schwarz
Höhe ca. 490 mm
Gewicht Z-version : ca. 200 g
ZP4-version : ca. 350 g
Montage 21 mm ø Bohrung (Für Dachstärke von 2 mm bis zu 7.5 mm muß die Bohrung ø22 mm Durchmesser sein)
Montageplatte Dicke Max. 2 mm (Modelle bis zu 7.5 mm auf Anfrage)

Bestellbezeichnungen

Modell Produkt Nr. Beschreibung
MH 4-Z 130000763 Z-mount with FME-system Verfügbarkeit
MH 4-ZP4 130000766 ZP4-mount with 4 m cable and FME-connector Verfügbarkeit

Der Strahler ist kompatibel mit allen unten aufgeführten Füßen

Z ZP4 Mount D

Kupolskruer blank m tekst D

Montage

This antenna is provided with type Z-mount. The whip is fastened to the mount by means of our standard ball-joint and wing screw system.

The adjustable ball-joint ensures that the whip can always be mounted in a vertical position independent of the angle of the installation spot.

The Z-mount is particularly well suited for mounting on car-roofs because of its ability to be installed exclusively with access from the outside.

The Z-Mount for roof thickness from 2 mm to 7.5 mm must be mounted from the inside.

However, the antenna can be installed anywhere on the car, as the Z-mount is equally well suited for mounting on e.g. trunk or wing.

1. Installationsabmessung

Z Mount 21 22 38 D

 

2. Installationsschritte

Z Mount inst step samlet GB

Do not use sealer on rubber gasket or other places.
 

3. Justierung

Die Antenne sollte grundsätzlich mit einem SWR-Messgerät justiert werden.
Das u.a. Schneidediagramm dient als Abstimmhinweis.

MH 4 Z 2m 1.5m cut