al buscador de productos

DiplexoresPRO-DIPX 174/200-...

100 W Diplexer for the 0 - 174 MHz and 200 - 960 MHz Ranges

Descripción

Diplexer for combining or splitting the two ranges 0 – 174 MHz and 200 – 960 MHz.
Chebychev design ensures very high isolation across the whole pass ranges.
High power handling capability.
Low insertion loss.
Low weight.
Wide temperature range.
Milled aluminium box ensures extraordinarily high mechanical strength.
PRO-DIPX 174/200-... is coated with black vinyl to prevent corrosion.
N-connectors on all ports (standard).
Also available with SMA-, TNC- or BNC- connector types.

Especificaciones

Eléctrico ES

Modelo

PRO-DIPX 174/200-...

Frequencia

COM-LOW port: 0 - 174 MHz
COM-HIGH port: 200 - 960 MHz

Potencia Máx. De Entrada

100 W CW simultaneously on both HIGH and LOW port
See Note *)

Pérdida De Inserción

0 - 174 MHz: ≤ 0.8 dB
200 - 960 MHz: ≤ 0.8 dB

Impedancia

50 Ω

Aislamiento

LOW to HIGH port: ≥ 40 dB

ROE

< 1.5:1

Mecánico ES

Conexión(s)

COM : N(f)
LOW : N(f)
HIGH : N(f)
(Other types available on request)

Dimensiones

133 x 80 x 31 mm (incl. connectors and flanges)

Peso	Aprox. 0.38 kg

Montaje

4.3 mm dia. (4 holes)

Ambiental

Rango De Temperatura De Funcionamiento

-40 °C to +60 °C

Protección De Ingreso

IP64

Designaciones de pedido

Modelo	Producto No.
PRO-DIPX 174/200-N(f)	200002252
PRO-DIPX 174/200-SMA(f)	200002253
PRO-DIPX 174/200-TNC(f)	200002254
PRO-DIPX 174/200-BNC(f)	200002255

Note *)

Adequate cooling to keep maximum temperature of the box surface below +60 °C must be provided (e.g. by heat sink or active cooling).

Typical response curves

Insertion Loss [dB]

Port Attenuation [dB]

Mounting Details

All dimensions are given in mm [in.]

Installation

The PRO-DIPX 174/200-... makes it possible to use only one antenna for the operation of two transceivers (one in each range). See the figure below. The antenna must be a dual-frequency antenna, i.e. it must be resonant on the actual frequencies in the two bands.

The transceivers may be used independently and will have no degrading influence on each other. Typically, the diplexer is installed next to the transceivers and only one cable is used between the diplexer and the antenna. The diplexer is suitable both for base station and mobile use.

The main tasks of the diplexer are to protect the individual receiver input from being destroyed by the transceiver in the contrary band and to ensure a low-loss path between the transceiver and the antenna which is not loaded by the other branch.

The diplexer can be operated together with any set of transceivers operating within the 0 - 174 MHz and 200 - 960 MHz frequency bands.