- Combining six transmitters or receivers on the same antenna.
- Better utilisation of good antenna position.
- Six antennas on the same transmitter or receiver.
- The only combining option with very small Tx-Tx frequency spacing.
- 30 W loads included (other loads or no loads as option).
Combinadores híbridosPRO-PHY450-6
6-Channel Hybrid Combiner for 450 MHz Transmitters
Descripción
Especificaciones
Eléctrico ES | ||
---|---|---|
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
Mecánico ES | ||
---|---|---|
|
||
|
||
|
Ambiental | ||
---|---|---|
|
Designaciones de pedido
Modelo | Producto No. | Frecuencia | |
---|---|---|---|
PRO-PHY450-6-1 | 210002937 | 380 - 400 MHz | |
PRO-PHY450-6-2 | Contact for product no. | 390 - 410 MHz | |
PRO-PHY450-6-3 | Contact for product no. | 400 - 420 MHz | |
PRO-PHY450-6-4 | 210002824 | 410 - 430 MHz | |
PRO-PHY450-6-5 | Contact for product no. | 420 - 440 MHz | |
PRO-PHY450-6-6 | 210002899 | 430 - 450 MHz | |
PRO-PHY450-6-7 | 210002938 | 440 - 460 MHz | |
PRO-PHY450-6-8 | 210002822 | 450 - 470 MHz | |
PRO-PHY450-6-9 | Contact for product no. | 460 - 480 MHz |
* Note
The isolation between the Tx ports is directly dependent on the terminating VSWR on the antenna port.
With an antenna load VSWR = 1.5, the isolation between the two Tx ports will be reduced to 20 dB @ 5 MHz bandwidth.
** Note
The VSWR of the load’s should be < 1.1! Each load should be able to dissipate 5/6 of the input power.
E.g.: With 60 W input, each load should be able to dissipate 60 W x 5/6 = 50 W.