Combiners compactosPRO-HDAR450-BB-4

Ultra Compact Broadband 4 ch. UHF450 Tx/Rx Combiner System for the PMR/LTE band 410-470 MHz

Descripción

  • This integrated compact single tray combining solution is able to connect the Tx and Rx channels from 4 radio-repeaters into just one antenna.
  • The combiner is standard tuned broad/wide-band up to a bandwidth of 5 MHz in the both transmit and receive band.
  • It means the operator can at any time change channel frequencies in the concerned bands without any retuning of the combiner.
  • The high performance Duplex Bandpass Filter isolates any noise interference on the receiving side, occuring from the transmitters themselves or unwanted high power signals from outside.
  • Minimal 19" rack space required - only 2HU (88.9 mm) See more in Mounting Details
  • The very compact broadband 50 W PRO-HDAR450-BB-4 can also be delivered in 2 or 3 channel 2HU versions. Please ask for availability

Especificaciones

Eléctrico ES
Modelo PRO-HDAR450-BB-4
Frequencia 410 - 470 MHz
Potencia Máx. De Entrada 50 W (por canal)
Máx. Espacio Tx-Tx, Δ Tx 5 MHz
Máx. Espacio Rx-Rx, Δ Rx 5 MHz
Aislamiento Tx - Rx > 80 dB (Both ways)
Pérdida De Inserción Tx Path < 9.5 dB
Impedancia 50 Ω
Espacio Duplex 5 - 15 MHz
Ant-Tx Aislamiento > 65 dB
Ganancia 1 dB ±1 dB (Rx path, factory set)
Aislamiento Rx-Rx > 20 dB
Aislamiento Tx-Tx > 80 dB
ROE ≤ 1.5:1 (Tx band) / ≤ 1.75:1 (Rx Band)
LNA Noise Figure < 3.5 dB
Figura De Ruido Eficaz Todas Las Salidas < 5 dB
Número de canales 4
Mecánico ES
Conexión(s) N(f)
Dimensiones 19" x 2 HU
483 x 89.9 mm
- ver dibujo para la profundidad de la bandeja
Peso 10.8 kg
Fuente de Alimentación ES
Tension 85 - 264 V AC
Frequencia 47 - 63 Hz
Alimentación C.A. (tip.) 0.35 A / 115 V AC
0.25 A / 230 V AC

Designaciones de pedido

Modelo Producto No. Frecuencia
PRO-HDAR450-BB-4/410-425/5-5-5/DI/50W 220000721 Low: 410 - 415 MHz / High: 420 - 425 MHz
PRO-HDAR450-BB-4/415-430/5-5-5/DI/50W 220000722 Low: 415 - 420 MHz / High: 425 - 430 MHz
PRO-HDAR450-BB-4/420-435/5-5-5/DI/50W 220000723 Low: 420 - 425 MHz / High: 430 - 435 MHz
PRO-HDAR450-BB-4/425-440/5-5-5/DI/50W 220000724 Low: 425 - 430 MHz / High: 435 - 440 MHz
PRO-HDAR450-BB-4/430-445/5-5-5/DI/50W 220000725 Low: 430 - 435 MHz / High: 440 - 445 MHz
PRO-HDAR450-BB-4/435-450/5-5-5/DI/50W 220000726 Low: 435 - 440 MHz / High: 445 - 450 MHz
PRO-HDAR450-BB-4/440-455/5-5-5/DI/50W 220000727 Low: 440 - 445 MHz / High: 450 - 455 MHz
PRO-HDAR450-BB-4/445-460/5-5-5/DI/50W 220000728 Low: 445 - 450 MHz / High: 455 - 460 MHz
PRO-HDAR450-BB-4/450-465/5-5-5/DI/50W 220000694 Low: 450 - 455 MHz / High: 460 - 465 MHz
PRO-HDAR450-BB-4/455-470/5-5-5/DI/50W 220000729 Low: 455 - 460 MHz / High: 465 - 470 MHz

Typical response curve

PRO HDAR BB450 465 4 DI 50W Curve

Diagrama de bloques

PRO HDAR BB450 465 4 DI 50W Block diagram

Accesorios

 ModeloNº de Producto
Power Cable EU , with Ground 210002646
Power Cable UK , with Ground 210002647
Power Cable US , with Ground 210002648

Note

Power cable is not included, must be ordered separately, see Accessories.

Detalles de Montaje

PRO HDAR 4 holeplacing

All dimensions are given in mm [in.]

Declaración de Conformidad UE y UK

Por la presente, Amphenol Procom declara que el tipo de producto PRO-HDAR450-BB-4 cumple con la directiva 2014/53/EU de la UE y el Reglamento de equipos de radio del UK de 2017 (S.I.2017 No. 1206).
El texto completo de la Declaración de Conformidad está disponible en:

https://amphenolprocom.com/images/shop/catalog/pdf-for-catalouges/Declaration-of-Conformity-PRO-HDAR-BB-2HU.pdf