Antennes omnidirectionnellesCXL 450-3LW-SS-Ex

ATEX certified, 3 dBd, Omnidirectional Base Station Antenna for the 380 - 470 MHz Band in Hazardous areas

Description

  • CXL 450-3LW-SS-Ex is a 3 dBd, vertically polarized, omnidirectional base station antenna which covers the 380 - 470 MHz band in four models with up to 10 MHz overlap.
  • The antenna is specified as an ATEX antenna for use in zone 2 in potentially explosive areas.
  • Before installing the antenna, please read the ATEX Product Manual carefully.
  • The antenna is suitable for use in gas groups IIA, IIB and IIC in zone 2.
  • It’s only necessary to install an ATEX grounding Kit on the LW-SS-Ex bracket, when the point of installation has a different electrical potential than the system.
  • The carefully designed colinear antenna radiating parts elements is made of brass tube and sealed in a high-quality conical glass fibre tube with low wind-load.
  • The accompanying U-bolts and fittings are made of stainless steel.
  • All metal parts in the antenna are DC-grounded. Consequently, the antenna shows a DC-short across the coaxial cable.

Spécifications

Électrique FR
Modèle CXL 450-3LW-SS-Ex
Fréquence 30 MHz wide frequency segments within 380 - 470 MHz.
See ordering designations
Type D'Antenne Coaxial dipole, broad-banded
Spéc. spéc. d'info Max. Puissance d'entrée RF due à max. EIRP en environnement ATEX *:

Group IIA : 32.6 dBm (1.8 W)
Group IIB : 30.3 dBm (1.0 W)
Group IIC : 27.8 dBm (0.6 W)
Polarisation Verticale
Type De Motif Omnidirectionnel
Largeur de faisceau: 3 dB plan vertical 30 °
Largeur de faisceau: 3 dB plan, horizontal Omnidirectionnel
Impédance 50 Ω
Gain 3 dBd (5.2 dBi)
ROS < 1.5:1
Bande Passante 30 MHz
Protection Antistatique Toutes les parties métalliques sont mises à la terre (le connecteur indique un court-circuit)
Code HCM HCM000ND00, 040DE00
Mécanique FR
Couple Du Connecteur N(f) : 0.7 - 1.1 Nm
Matériaux Radome : Polyurethane-coated glass fibre
Mounting bracket : Stainless acid-proof steel (AiSi 316L)
U-bolt and fittings : Stainless steel (AiSi 316)
Couple D'Installation 3 Nm
Couleur Bleu (RAL 5015)
Vent 0.029 sq. m
Charge Du Vent 33.6 N (160 km/h)
Dia. En Haut 17 mm
Dia. À L'Extrémité Inférieure 23 mm
La Taille Environ 1515 mm
Poids Environ 1.55 kg
Fixation On 16 to 54 mm dia. mast tube
Marquage ATEX II 3G Ex nA IIC T6
Environnement
Gamme De Température De Fonctionnement -30 °C to +60 °C
Vitesse Du Vent De Survie 200 km/h
Protection Contre La Pénétration IP66

Désignations de commande

Model N ° de produit Fréquence
CXL 450-3LW-SS-Ex/s 115000013 380 - 410 MHz
CXL 450-3LW-SS-Ex/f 115000014 406 - 430 MHz
CXL 450-3LW-SS-Ex/l 115000015 420 - 450 MHz
CXL 450-3LW-SS-Ex/h 115000016 440 - 470 MHz
Accessoires
ATEX grounding Kit 115000100

Calculation of max. Antenna input power in different ATEX groups

ATEX GROUPMAX. EIRP POWERANTENNA GAINMAX INPUT POWER
IIA 37.7 dBm (6.0 W) 3 dBd / 5.15 dBi 32.6 dBm (1.8 W)
IIB 35.4 dBm (3.5 W) 3 dBd / 5.15 dBi 30.3 dBm (1.0 W)
IIC 33.0 dBm (2.0 W) 3 dBd / 5.15 dBi 27.8 dBm (0.6 W)

 

*See the ATEX Product Manual (safety and mounting instructions) and related EU DECLARATION OF CONFORMITY ATEX Directive 2014/34/EU.

Typical Radiation Pattern (E-Plane)

Typical Radiation Pattern (H-Plane)

Typical Gain and VSWR curves

Mounting Details

LW-SS-Ex-beslag mont iso GB 280x