- Sturdy ¼ λ mobile antenna in professional industry standard quality.
- Factory-adjusted broadband matching unit for 74.2 - 77.7 MHz / 84 - 87.5 MHz and 167.5-169.5 MHz / 172 - 174 MHz
- Tuning not necessary – but can be fine-tuned if needed.
- Separate broadband matching unit for time-saving mounting.
- Necessary cable length between the matching unit and the antenna mount: 100 mm (FME junction cable included).
- Stainless steel Z-mount with socket joint and wing screw.
- Simple mounting exclusively with access from the outside.
- FME antenna cable for both 80 MHz and 150 MHz BOS can be mounted directly in the matching unit without special antenna connectors.
Fouet AntennesML 1-ZR/BOS2 BBMU
¼ λ Broad-Band Mobile Antenna for the 80 MHz and 150 MHz BOS Band
Description
Spécifications
| Électrique FR | ||
|---|---|---|
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
| Mécanique FR | ||
|---|---|---|
|
||
|
||
|
||
|
||
|
||
Désignations de commande
| Model | N ° de produit | |
|---|---|---|
| ML 1-ZR/BOS2 BBMU | 130000629 |
Additional Data
SUNDRIES: For connection of special cables (RG 213, H2000, RG 223 etc.) to the matching unit the jumper cable JPC 40/RG 58/FN can be used. This is a 40 cm long RG 58 cable with one FME connector and one N-female connector.
INSTALLATION (if mounted from the outside)
- Equip the matching unit with FME antenna cables and the supplied 100 mm junction cable.
- Draw the 100 mm junction cable through the antenna hole from the outside (e.g. with a drawstring between the car roof and the dome).
- The Z-mount is particularly well suited for mounting on car-roofs because of its ability to be installed exclusively with access from the outside. The Z-Mount for roof thickness from 2 mm to 7.5 mm must be mounted from the inside. However, the antenna can be installed anywhere on the car, as the Z-mount is equally well suited for mounting on e.g. trunk or wing.
- Attach the cable to the Z-mount and install the mount from the outside following the below given instructions.
1. INSTALLATION DIMENSIONS
2. INSTALLATION STEPS
Do not use sealer on rubber gasket or other places.
3. TUNING
The ML 1-ZR/BOS2 BBMU is factory-tuned to the following
80 MHz BOS area:
LOW: 74.2 - 77.7 MHz
HIGH: 84 - 87.5 MHz
150 MHz BOS area:
LOW: 167.5 - 169.5 MHz
HIGH: 172 - 174 MHz
Fine-tuning or frequency change can if needed be done as follows:
Adjustment of the BBMU BOS2 by means of SWR 4000
1. Fine tune C1 for adjusting the 4m band.
2. Fine tune C2 and C3 for adjusting the 2m band.
100 mm FME cable (included in the supply of the broad-band antenna).
Importent: The cable length should not be changed!
SWR 4000 Analyzer with built-in signal generator and graphic display range of measurement 30 - 2700 MHz.
3.Tuning
The ML 1-ZR/BOS2 BBMU is factory-tuned to the following
80 MHz BOS area:
LOW: 74.2 - 77.7 MHz
HIGH: 84 - 87.5 MHz
150 MHz BOS area:
LOW: 167.5 - 169.5 MHz
HIGH: 172 - 174 MHz
Fine-tuning or frequency change can if needed be done as follows:
Adjustment of the BBMU BOS2
1. Fine tune C1 for adjusting the 4m band.
2. Fine tune C2 and C3 for adjusting the 2m band.
100 mm FME cable (included in the supply of the broad-band antenna).
Importent: The cable length should not be changed.
Produits associés
Combineurs compacts
View all Amphenol Procom hybrid Tx/Rx Compact combiners for VHF & UHF. To be used e.g. in mobile TETRA/PMR/LMR control stations. Learn more.
Antennes de combinaison GPS
Amphenol Procom have a huge assortment of GPS Antennas. Beneficial products for navigation/location applications. Read more here.
Profil bas / Covert
In our collection of Low Profile Antennas covering VHF and UHF bands with omnidirectional coverage. Best quality products on the market. View our collection.
Triplex
RF Multiplex Filters portfolio by Amphenol Procom consist of quality Triplex Filters and Quadroplex Filters with high performance. Learn more here.