to product finder

Whip AntennasML 1-ZG

¼ λ Mobile Antenna with Shock Spring for the 80 MHz Band

Description

Sturdy, general-purpose ¼ λ antenna in professional quality.
Available with glass fiber or stainless steel whip.
Stainless steel ZG-mount with M8 x 1-thread whip-fastening system.
Simple mounting exclusively with access from the outside.
Choice between two connection principles:
- ZG-mount: FME-connection (supplied without cable).
- ZGP4-mount: Permanently attached 4 m cable terminated with FME-connector.

Specifications

Electrical

Model

ML 1-ZG

Frequency

Tunable by cutting within : 66 ... 88 MHz
(Also applicable : 88 ... 175 MHz)

Antenna Type

Mobile whip antenna

Max. Input Power

250 W

Polarisation

Vertical

Impedance

50 Ω

VSWR	≤ 1.3 @ f. res.

Bandwidth

≥ 8 MHz @ VSWR ≤ 2.0

Gain (EIA RS-329-1)

0 dB

Mechanical

Materials

Whip : Conical glass fiber or black-chromed stainless steel.
Black-chromed brass
Spring : Black-chromed stainless steel
Mount : Black-chromed brass
Weather- and shockproof plastics
Stainless steel

Installation Torque

7.5 ±1 Nm

Colour

Black

Height

Approx. 1100 mm / 43.31 in.

Weight

ZG-version : Approx. 210 g / 0.46 lb.
ZGP4-version : Approx. 360 g / 0.8 lb.

Mounting

21 mm dia. hole

Ordering Designations

Model	Product No.	Description	Frequency
ML 1-ZGR	130000611	Stainless Steel Whip	ZG-mount with FME-system
ML 1-ZGP4R	130000612	Stainless Steel Whip	ZGP4-mount with 4 m cable and FME-connector
ML 1-ZG	130000609	Glassfibre Whip	ZG-mount with FME-system
ML 1-ZGP4	130000610	Glassfibre Whip	ZGP4-mount with 4 m cable and FME-connector

The whip is compatible with all below mounts

Installation

This antenna is supplied with our type ZG-mount for mounting from the outside in a 21 mm dia. hole on horizontal surfaces as e.g. roof top or trunk lid.
The ZG-mount is provided with an M8 x 1 thread mount system. This construction meets the demand for a low-profile mobile mount with a slim appearance and with protection against theft of the antenna whip.
When cleaning the car in automatic washing machines, the whip is easily removed using a spanner size 12 mm. The whip is refitted again by screwing it onto the M8 x 1 thread stud and tightening it with the spanner.