Hybrid CombinersPRO-PHY150-5

5-Channel Hybrid Combiner for 150 MHz Transmitters

Description

  • Combining five transmitters or receivers on the same antenna.
  • Better utilization of good antenna position.
  • Five antennas on the same transmitter or receiver.
  • The only combining option with very small Tx-Tx frequency spacing.
  • 30 W load supplied (other loads or no load as option).

Specifications

Electrical
Model PRO-PHY150-5
Filter Type Hybrid Junction
Frequency 136 - 175 MHz (see table)
Max. Input Power 37.5 W per channel (max. 125 W with larger load)
Insertion Loss < 8.2 dB ±0.5 dB @ 8 MHz BW
< 8.3 dB ±0.5 dB @ 16 MHz BW
Impedance 50 Ω
Isolation Tx1 - Tx2 > 32 dB @ 8 MHz BW
> 27 dB @ 16 MHz BW
(* see note)
VSWR < 1.5:1 with all other ports terminated with 50 Ω
Load 30 W load fitted (other ratings available)
(** see note)
No. of channels 5
Mechanical
Connection(s) N(f) (other on request)
Dimensions 420 x 89 (incl. conn.) x 42 mm (excl. load) /
16.50 x 3.50 (incl. conn.) x 1.65 in. (excl. load)
Weight Apprx. 1.6 kg / 3.53 lb.
Environmental
Operating temperature range -30 °C to +60 °C

Diagram and Mounting

TYPICAL RESPONSE CURVE

Ordering Designations

Model Product No. Frequency
PRO-PHY150-5-1 210001231 136 - 141 MHz
PRO-PHY150-5-2 210001232 140 - 145 MHz
PRO-PHY150-5-3 210001233 144 - 149 MHz
PRO-PHY150-5-4 210001234 148 - 153 MHz
PRO-PHY150-5-5 210001235 152 - 157 MHz
PRO-PHY150-5-6 210001236 156 - 161 MHz
PRO-PHY150-5-7 210001129 160 - 165 MHz
PRO-PHY150-5-8 210001131 164 - 169 MHz
PRO-PHY150-5-9 210001237 168 - 173 MHz
PRO-PHY150-5-10 210001238 172 - 175 MHz

* Note

The isolation between the Tx ports is directly dependent on the terminating VSWR on the antenna port.
With an antenna load VSWR = 1.5, the isolation between the two Tx ports will be reduced to 20 dB @ 5 MHz bandwidth.

** Note

The VSWR of the load’s should be < 1.1! Each load should be able to dissipate 4/5 of the input power.
E.g.: With 50 W input, each load should be able to dissipate 50 W x 4/5 = 40 W.