to product finder

Mobile MountsZG-Mount

Low Profile Mobile Antenna Mount with Thread Stud

Description

Used together with all Amphenol Procom ZG-type antenna whips.
M8x1 thread whip-mounting system.
For installation on horizontal surfaces (roof top or trunk lid) in a 21 mm dia. hole.
Particularly well suited for rooftop-mounting because of very low internal protrusion and ability to be installed exclusively with access from the outside.
Complete line of whips available for all communications bands up to 1300 MHz.
Mounting body made of stainless steel!
Choice between two connection principles:
- ZG-mount: FME-connection (supplied without cable).
- ZGP4-mount: Permanently attached 4 m cable terminated with FME-connector.
- ECE R118.02 approved cable.

Specifications

Electrical

Model

ZG-Mount

Frequency

0 - 1300 MHz

Application

Low-profile mount for mobile antennas

Mechanical

Installation Diameter

38 mm / 1.50 in.

Materials

Stainless steel
Black chromed brass
Environment-proof plastics

Installation Torque

7.5 ± 1 Nm

Colour

Black

Whip Connection

M8 x 1 thread stud

Height

Approx. 28 mm / 1.10 in.

Weight

ZG-version : Approx. 70 g / 0.15 lb.
ZGP4-version: Approx. 210 g / 0.46 lb.

Mounting

21 mm dia. hole

Mounting Plate Thickness

Max. 2 mm

Ordering Designations

Model	Product No.
ZG-Mount	130000377
ZGP4-Mount	130000388
ZGP5-Mount	130000389
Accessories FME-Cables
1 m FME(f) to FME(f) cable	130000437
2 m FME(f) to FME(f) cable	130000447
3 m FME(f) to FME(f) cable	130000457
4 m FME(f) to FME(f) cable	130000466
5 m FME(f) to FME(f) cable	130000474
6 m FME(f) to FME(f) cable	130000483
4 m FME(f) to FME(f) cable, white	110000064
6 m FME(f) to FME(f) cable, white	110000066
12 m FME(f) to FME(f) cable, white	110000068
18 m FME(f) to FME(f) cable, white	110000069
Accessories FME-Connectors
FME(f)-FME(f) Connector Adaptor	130000583
FME(m)-P(m) (Prolongation) Connector Adaptor	130000565
FME(m)-N(m) Connector Adaptor	130000571
FME(m)-SMA(f) Connector Adaptor	130000578
FME(m)-BNC(m) Connector Adaptor	130000566
FME(m)-TNC(m) Connector Adaptor	130000569
FME(m)-UHF(m) Connector Adaptor	130000572
FME(m)-MiniUHF(m) Connector Adaptor	130000573
FME(m)-MiniUHF(m)(Elbow) Connector Adaptor	130000582
FME(m)-BNC(m)(Elbow) Connector Adaptor	130000580
FME(m)-TNC(m)(Elbow) Connector Adaptor	130000581
FME(m)-SMA(m) Connector Adaptor	130000577

FME-System Accessories - Note

For further information about other types of FME-cables and FME-connectors, please compare the cable and connector data sheets under accessories in our catalogue.

Installation

The ZG-mount is designed for mounting in a 21 mm dia. hole on horizontal surfaces as e.g. roof top or trunk lid, with access from the outside only.

A good contact surface on the inside of the car body must always be ensured, thus enabling the base plate to get in direct contact with the metal parts of the car, which is of utmost importance for proper performance of the antenna.

The ZG-mount is provided with an M8 x 1 thread mount system. This construction meets the demand for a low profile mobile mount with a slim appearance and with protection against theft of the antenna whip.

When cleaning the car in car-washing machines, the whip is easily removed using a fork spanner. The whip is refitted again by screwing it onto the thread stud and tightening it with the spanner.