GNSS Combination AntennasProEdge

A 2x2 MIMO LTE and WIFI multi purpose antenna for 2G/3G/4G/5G,
CBRS and WIFI 6E 2.4/4.9-7.2 GHz with optional GNSS

Description

  • The ProEdge provides antennas for multiple technologies in fixed or mobile end-point device applications.
  • Ideal for Industrial robotics and telemetry, smart metering, autonomous vehicles, smart cities and automated parking, backup and remote terminal data connections.
  • In-built 2x2 MIMO antenna for use with LTE/4G (617 - 960 MHz and 1710 - 3800 MHz) up to two WiFi 6E 2.4/4.9-7.2 GHz.
  • Optional GNSS antenna for GPS L1, Glonass, Beidou and Galileo.
  • Full hemispherical coverage for the GNSS antennas.
  • Built-in high gain, low noise amplifier.
  • Right-Hand Circular Polarization.
  • 3 - 15 V DC for GNSS supply.
  • Can be configuered as 2-in-1, 3-in-1, 4-in-1 or 5-in-1.
  • DC supply via GNSS RF-connector.
  • ECE R118.02 approved cable.
  • IP69 Ingress protection.
  • IK10 rated enclosure.

Specifications

Electrical
Model ProEdge
Frequency 617 - 960 MHz 1.7 - 2.7 GHz 3.4 - 3.8 GHz 4.9 - 7.2 GHz
Antenna Type Mobile Disk Style Antenna
Max. Input Power 25 W
Polarisation Vertical
Impedance 50 Ω
Isolation * > 5 dB > 15 dB > 25 dB > 30 dB
VSWR * < 2.5:1 < 2.0:1 < 2.0:1 < 2.0:1
EMC Full protection (EN 301 489-1)
Mechanical
Compliance ECE R118.02 approved cables
Connection(s) RG 316 / RG 178, SMA(m) (all antennas)
Materials ASA, Zamak 5
Installation Torque 4 ± 0.5 Nm
Colour Black (RAL 9005) or White (RAL 9010)
Length 209 mm / 8.23 in.
Width 79 mm / 3.11 in.
Height 69 mm / 2.7 In.
Weight Approx. 550 g. / 1.2 lb.
Mounting 18.5 mm / 0.8 in. dia. hole
GNSS Antenna
Cross Polar Discrimination (GNSS) > 10 dB (typ.)
Frequency (GNSS) 1559 - 1609 MHz (GPS L1, Glonass, Beidou and Galileo)
Polarisation (GNSS) RH Circular
Impedance (GNSS) 50 Ω
GNSS LNA
Gain (GNSS LNA) 25 dB ±3 dB
Noise Figure (GNSS LNA) < 3.5 dB : 1559 - 1610 MHz
Typ. 2.0 dB @ 1575 MHz
Attenuation Out Of Band (GNSS LNA) > 25 dB, 0 - 1525 MHz
> 25 dB, 1640 - 3000 MHz
P1dB (GNSS LNA) > 6 dBm
VSWR (output) (GNSS LNA) < 2.0:1
Supply Voltage (GNSS LNA) 3 - 15 V DC
Current Consumption (GNSS LNA) 20 mA
Environmental
Operating temperature range -50 °C to +75 °C
Ingress Protection IP69
Impact Protection IK10

Note

* Measured with 5 m [196.85 in.] of LMR 195 cable on a 600 x 600 mm [23.6 x 23.6 in.] groundplane.

Ordering designations

Use the guide below to make the name of the ProEdge you would like to buy.

Model NameCover colorNo. of GNSSNo. of LTENo. of WIFI antennasCable lengthConnectors on GNSSConnectors on LTEConnectors WIFI
ProEdge -W (White)
-B (Black)
Blank
-G1 (1x GNSS)
-L2 (2x LTE antennas) Blank (No WIFI)
-W1 (1x WIFI antenna)
-W2 (2x WIFI antennas)
Blank (approx. 0.3 m / 1 ft cable length)
-P5 (5 m / 16.4 ft cable length)
-S (SMA-M)
-FAKRA (on request)
/S (SMA-M)
/FAKRA (on request)
Blank (no WIFI)
/S (SMA-M)
/RP-S (Reverse Polarity SMA-M)
/FAKRA (on request)
Naming Example        
ProEdge -B -G1 -L2 -W2 -P5 -S /S /RP-S

 

ProEdge-B-G1-L2-W2-P5-S/S/RP-S

Typical Radiation Patterns (650 - 2100 MHz)

ProfinFW CST radiation

Typical Radiation Patterns (2600 - 7000 MHz)

ProfinFW CST radiation

Typical VSWR curve 4G/5G/WiFi port 1 & 2

ProEdge VSWR

* Measured with 5 m [196.85 in.] of LMR 195 cable on a 600 x 600 mm [23.6 x 23.6 in.] groundplane.

Typical Isolation curve 4G/5G/WiFi between port 1 & 2

ProEdge Iso

* Measured with 5 m [196.85 in.] of LMR 195 cable on a 600 x 600 mm [23.6 x 23.6 in.] groundplane.


 

Mechanical Outline

ProEdge dimension