- Can be used together with all Amphenol Procom mobile antenna whips provided with toggle joint.
- Installation possible everywhere on the car.
- Particularly well suited for rooftop-mounting because of very low internal protrusion and ability to be installed exclusively with access from the outside. Models with roof thickness from 2 mm to 7.5 mm mounting from the inside.
- Hole diameter: 21 mm.
- Mounting body made of stainless steel !
- Wide variety of antenna whips available in the frequency range up to 470 MHz.
- Choice between two connection principles:
- Z-mount : FME-connection (supplied without cable).
- ZP4-mount : Permanently attached 4 m cable terminated with FME-connector.
- ECE R118.02 approved cable.
- Available in bright or black (black plastic parts for both versions).
Description
Specifications
| Electrical | ||
|---|---|---|
|
||
|
||
|
||
| Mechanical | ||
|---|---|---|
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
Ordering Designations
| Model | Product No. | Description | |
|---|---|---|---|
| Z-Mount | 130000396 | Z-mount (bright) with FME-system | |
| BZ-Mount | 130000398 | BZ-mount (black) with FME-system | |
| ZP4-Mount | 130000410 | ZP4-mount (bright) with 4 m cable and FME-connector | |
| BZP4-Mount | 130000412 | BZP4-mount (black) with 4 m cable and FME-connector | |
| ZP5 | 130000411 | ZP5-mount (bright) with 5 m cable and FME-connector | |
| BZP5-Mount | 130000408 | BZP5-mount (black) with 5 m cable and FME-connector | |
| Accessories - Roof Thickness | |||
| Z-Mounting Adaptor | 130002393 | 2 - 5 mm | |
| Z-Mounting Adaptor | 130002394 | 5 - 7.5 mm | |
| Accessories - FME-Cables | |||
| 1 m FME(f) to FME(f) cable | 130000437 | ||
| 2 m FME(f) to FME(f) cable | 130000447 | ||
| 3 m FME(f) to FME(f) cable | 130000457 | ||
| 4 m FME(f) to FME(f) cable | 130000466 | ||
| 5 m FME(f) to FME(f) cable | 130000474 | ||
| 6 m FME(f) to FME(f) cable | 130000483 | ||
| 4 m FME(f) to FME(f) cable, white | 110000064 | ||
| 6 m FME(f) to FME(f) cable, white | 110000066 | ||
| 12 m FME(f) to FME(f) cable, white | 110000068 | ||
| 18 m FME(f) to FME(f) cable, white | 110000069 | ||
| Accessories - FME-Connectors | |||
| FME(f)-FME(f) Connector Adaptor | 130000583 | ||
| FME(m)-P(m) (Prolongation) Connector Adaptor | 130000565 | ||
| FME(m)-N(m) Connector Adaptor | 130000571 | ||
| FME(m)-SMA(f) Connector Adaptor | 130000578 | ||
| FME(m)-BNC(m) Connector Adaptor | 130000566 | ||
| FME(m)-TNC(m) Connector Adaptor | 130000569 | ||
| FME(m)-UHF(m) Connector Adaptor | 130000572 | ||
| FME(m)-MiniUHF(m) Connector Adaptor | 130000573 | ||
| FME(m)-MiniUHF(m)(Elbow) Connector Adaptor | 130000582 | ||
| FME(m)-BNC(m)(Elbow) Connector Adaptor | 130000580 | ||
| FME(m)-TNC(m)(Elbow) Connector Adaptor | 130000581 | ||
| FME(m)-SMA(m) Connector Adaptor | 130000577 | ||
FME-System Accessories - Note
For further information about other types of FME-cables and FME-connectors, please compare the cable and connector data sheets under accessories in our catalogue.
Installation
The Z-mount is designed for mounting in a 21 mm dia. hole.
The whip is fastened to the mount by means of our standard ball joint and wing screw system. The adjustable ball joint ensures that the whip can always be mounted in a vertical position independent of the angle of the installation spot.
The Z-mount is particularly well suited for mounting on car roofs because of its ability to be installed exclusively with access from the outside. The Z-mount for roof thickness from 2 mm to 7.5 mm must be mounted from the inside.
However, the antenna can be installed anywhere on the car, as the Z-mount is equally well suited for mounting on e.g. trunk or wing.
A good contact surface on the inside of the car body must always be ensured, thus enabling the base plate to get in direct contact with the metal parts of the car, which is of utmost importance for proper performance of the antenna.
1. Installation dimensions
2. Installation step
Do not use sealer on rubber gasket or other places.
Dimensions
Please note
The whips are normally installed on the mount by means of the standard wing screw, but may also be installed using the optional hat screw with key (accessory item).
Related products
GPS Combination Antennas
Amphenol Procom have a huge assortment of GPS Antennas. Beneficial products for navigation/location applications. Read more here.
Low Profile Antennas
In our collection of Low Profile Antennas covering VHF and UHF bands with omnidirectional coverage. Best quality products on the market. View our collection.
Whip Antennas
Amphenol Procom offers a comprehensive collection of quality Whip Antennas for nondirectional communication. See our product line here.
Diplex Filters
All Amphenol Procom Diplex filters are thoroughly tested, tuned and will be delivered prepared for installation. Custom-made is possible. Learn more.