X-Mount

Stream-lined Mobile Mount

Description

  • Mobile mount with a nice, “streamline”-look, which can be installed everywhere on the car in an 18 mm dia. hole.
  • Especially suited for mounting on the narrow strip on rear wing between trunk lid and car side.
  • M6 thread whip-mounting system.
  • Very low requirements to installation depth both under and after installation.
  • Designed for installation with access from the outside only.
  • With access available from the inside, installation is possible in a 14 mm dia. hole.
  • Bendable section in mount makes whip tiltable 30° by hand.
  • Complete line of whips available for all communications bands up to 1300 MHz.
  • Mounting body made of stainless steel !
  • Choice between two connection principles:
    • X-mount: FME-connection (supplied without cable).
    • XP4-mount: Permanently attached 4 m cable terminated with FME-connector.

Specifications

Electrical
Frequency 0 - 1300 MHz
Application Mount for mobile antennas
Mechanical
Build-In Depth Active : 30 mm
Passive : 11 mm
Materials Stainless steel
Black chromed brass
Cu-nite brass
Environment-proof plastics
Installation Torque 4 +/- 1 Nm
Colour Black
Dimensions 41. 5 mm/27.5 mm
Height 420 mm / 16.54 in.
Whip Connection M6 thread stud
Weight X-version : Approx. 45 g
XP4-version : Approx. 180 g
Mounting 18 mm dia. hole
Mounting Plate Thickness Max. 2 mm

Ordering Designations

Model Product No. Description
X-Mount 130000373 X-mount with FME-system
XP4-Mount 130000374 XP4-mount with 4 m cable and FME-connector
XP5-Mount 130000375 XP5-mount with 5 m cable and FME-connector
1 m FME(f) to FME(f) cable 130000437
2 m FME(f) to FME(f) cable 130000447
3 m FME(f) to FME(f) cable 130000457
4 m FME(f) to FME(f) cable 130000466
5 m FME(f) to FME(f) cable 130000474
6 m FME(f) to FME(f) cable 130000483
4 m FME(f) to FME(f) cable, white 110000064
6 m FME(f) to FME(f) cable, white 110000066
12 m FME(f) to FME(f) cable, white 110000068
18 m FME(f) to FME(f) cable, white 110000069
FME(f)-FME(f) Connector Adaptor 130000583
FME(m)-P(m) (Prolongation) Connector Adaptor 130000565
FME(m)-N(m) Connector Adaptor 130000571
FME(m)-SMA(f) Connector Adaptor 130000578
FME(m)-BNC(m) Connector Adaptor 130000566
FME(m)-TNC(m) Connector Adaptor 130000569
FME(m)-UHF(m) Connector Adaptor 130000572
FME(m)-MiniUHF(m) Connector Adaptor 130000573
FME(m)-MiniUHF(m)(Elbow) Connector Adaptor 130000582
FME(m)-BNC(m)(Elbow) Connector Adaptor 130000580
FME(m)-TNC(m)(Elbow) Connector Adaptor 130000581
FME(m)-SMA(m) Connector Adaptor 130000577

Additional Data

FME-SYSTEM ACCESSORIES

FME-CABLES TYPE PRODUCT NO.
1 m FME(f) 130000437
2 m FME(f) 130000447
3 m FME(f) 130000457
4 m FME(f) 130000466
5 m FME(f) 130000474
6 m FME(f) 130000483
4 m FME-white(f) 110000064
6 m FME-white(f) 110000066
12 m FME-white(f) 110000068
18 m FME-white(f) 110000069
FME-CONNECTORS TYPE PRODUCT NO.
FME(f)-FME(f) 130000583
FME(m)-P(m)
(Prolongation)
130000565
FME(m)-N(m) 130000571
FME(m)-FSMA
(Female-SMA)
130000578
FME(m)-BNC(m) 130000566
FME(m)-TNC(m) 130000569
FME(m)-UHF(m) 130000572
FME(m)-MUHF(m)
(Mini-UHF)
130000573
FME(m)-EMUHF(m)
(Elbow-MUHF)
130000582
FME(m)-EBNC(m)
(Elbow-BNC)
130000580
FME(m)-ETNC(m)
(Elbow-TNC)
130000581
FME(m)-SMA(m) 130000577


For further information about other types of FME-cables and FME-connectors, please compare the cable and connector data sheets under accessories in our catalogue.


INSTALLATION

X-mount antenna types can be mounted anywhere on the car, however, roof top mounting is always recommended.

The X-mount is able to be mounted on the often very narrow strip on the rear wing between the trunk lid and the side of the car.

Mounting can take place exclusively with access from the outside when drilling an 18 mm dia. hole. Mounting can take place from the inside by drilling a 14 mm dia. hole, in which case the bottom plastic ring of the packing gasket should be removed with a sharp cutter.

A good contact surface on the inside of the car body must always be ensured, thus enabling the base plate to get in direct contact with the metal parts of the car, which is of utmost importance for proper performance of the antenna.

When cleaning the car in car-washing machines, the whip is easily removed using a fork spanner. The whip is refitted again by screwing it onto the thread stud and tightening it lightly with the spanner.

As the X-mount is internally equipped with a bendable section, the antennas can always be adjusted to an upright position independent of the tilt angle of the installation spot (up to 30° tilt).
 

1. INSTALLATION DIMENSIONS


 

2. INSTALLATION STEPS

Do not use sealer on rubber gasket or other places.

 

DIMENSIONS



A SELECTION OF THE VARIOUS WHIPS WHICH CAN BE CONNECTED TO THE X-MOUNT