- CXL 2-5HD/… is a 5 dBd, vertically polarized, omnidirectional base station antenna.
- The antenna has a bandwidth of 7-8 MHz.
- The antenna is provided with our sturdy type “HD” mast mount, which is a heavy-duty, multipurpose mounting bracket made of non-corrosive aluminium. The accompanying U-bolts and fittings are made of stainless steel.
- The antenna can be mounted on mast tubes of 58 to 105 mm in outer diameter. Further, the construction of the mount makes it possible to lead the cable either along the inside or on the outside of the mast tube.
- In designing this antenna, special emphasis has been laid on obtaining a large bandwidth both in relation to VSWR and gain. The phasing of the radiating elements is carefully adjusted to yield maximum gain in the horizontal plane, with the level of the sidelobes reduced to a minimum.
- The antenna element is sealed in a high-quality, conical glass fibre tube with low wind-load, which will ensure performance undisturbed in all climates.
- To substantially reduce noise caused by atmospherical discharges, all metal parts in the antenna are DC-grounded. Consequently, the antenna shows a DC-short across the coaxial cable.
- CXL 2-5HD/… is a vibration-proof, lightweight, slim-line, corrosion-resistant, modern style base station antenna.
Omni AntennasCXL 2-5HD/...
Sturdy, 5 dBd Gain, Base Station Antenna for the 160 MHz Band
Description
Specifications
| Electrical | ||
|---|---|---|
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
| Mechanical | ||
|---|---|---|
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
| Environmental | ||
|---|---|---|
|
||
|
||
Diagrams and Mounting
TYPICAL GAIN AND SWR CURVES
TYPICAL RADIATION PATTERN (E-PLANE)
TYPICAL RADIATION PATTERN (H-PLANE)
MULTI-PURPOSE MOUNTING BRACKET
PLEASE NOTE
When using the CXL 2-5HD/… at windy locations where wind speeds of more than 150 km/h can be expected, the antenna must be mounted on the side of the mast and the top section of the glassfibre tube stabilized with a bracket.Ordering Designations
| Model | Product No. | Frequency | |
|---|---|---|---|
| CXL 2-5HD/l | 100000738 | 148 - 155 MHz | |
| CXL 2-5HD/lm | 100000739 | 155 - 162 MHz | |
| CXL 2-5HD/hm | 100000740 | 162 - 169 MHz | |
| CXL 2-5HD/h | 100000741 | 164 - 172 MHz |
Please Note
When using the CXL 2-5HD/… at windy locations where wind speeds of more than 150 km/h can be expected, the antenna must be mounted on the side of the mast and the top section of the glass fibre tube stabilized with a bracket.
For this purpose the fixated bracket FB-HD with slidable side mounting clamps (SMC) can be used.
Related products
Brackets and Mounts
Amphenol Procom design a wide and varied range of Wall Brackets and Antenna Mounting Poles. Robust professional install and longevity. See our collection here.
Cable Connectors
Amphenol Procom offer quality Cable Components like Grounding Kits, Coaxial Loads, Attenuators, Arrestors, DC-blocks and SWR Analyzers. See our products here.
Corrugated Cables
Amphenol Procom offers several Corrugated Cables like Super Flexible- and Cobber Cables. All are of the highest quality on the market. See our collection.
Compact Combiners
View all Amphenol Procom hybrid Tx/Rx Compact combiners for VHF & UHF. To be used e.g. in mobile TETRA/PMR/LMR control stations. Learn more.